FINIXA Clay Bar - 200 gram

FINIXA Detailing Clay Bar

FINIXA Claybar is an engineered resin compound used to remove contaminants from the surface of your car’s paint, glass, fiberglass and metal.  It is a kneadable gum for removing paint overspray without harming car paint.

How do I use the detailing clay bar?

Follow these steps

1. Wash and dry your vehicle.
2. Spray a small area with clay lubricant, no bigger than 2 square feet.
3. Gently rub the clay bar back and forth across the wet area. It will grab at first. This means that it is pulling contaminants out of the paint. When it glides freely, the paint is clean.
4. Wipe the area with a microfiber towel and use the clay lubricant to remove any clay residue. Rub your fingers across the paint now; it should be as smooth as glass. If it’s not, repeat the process. Reshape the clay bar as needed to expose a clean surface. Keep the clay well-lubricated.
5. Continue these steps until you’ve clayed the entire vehicle. Clay does a marvelous job on glass and chrome too.
6. Store the clay bar in its original case if possible, or in an airtight plastic bag. Spray it with lubricant to keep it moist. Do not allow the clay to freeze.
7. Always follow claying with a wax or sealant. Clay will removing existing wax and may leave tiny holes where contaminants have been removed. They must be sealed in order to protect the paint from corrosion.

Features FINIXA Clay Bar 200 gram

• For professional use
• Easy to use
• Can be used on car paint, glass, plastic, aluminum and chrome
• Removes paint overspray
• Doesn't scratch
• Can also be used to remover other contamination like tar, tree resin and flies