MIPA 1K Rapidprimer Red/Brown

MIPA 1K Adhesive Primer Red/Brown

Mipa Rapidfiller is a one-component primer with very good filling properties, active corrosion protection and excellent adhesion on iron, steel, zinc and aluminium as well as on recoatable plastics commonly used in the automotive industry (we recommend verifying the recoatability).

Outstanding corrosion protection on steel and galvanized steel. Objects protected with Mipa Rapidfiller can be temporarily stored without any problems at all. The primer dries quickly, is robust and can be welded. There's no need to waste valuable time and energy stripping the paint from the spot you want to weld.

Benefits:

• Fast to assemble
• Fast drying
• Weldable
• Temporary corrosion protection.

Processing Instructions

• Apply only on well degreased substrates.
• Sand slightly zinc and aluminium.
• Do not apply on thermoplastic substrates.
• This product cannot be overcoated with polyester spray filler.
• Overcoatable with solvent-based and water-based 1K and 2K paints.
• Applicable as primer or filler.
• Thinner:  50% MIPA 2K Thinner V25 or MIPA UN Thinner

Technical Information

• Spray viscosity: 18-22 sec DIN
• Nozzle: 1,3 - 1,8mm
• Pressure: 1,6 - 2 Bar
• Spreading rate: 6,0 - 8,0 m² / ltr
• Dry coat thickness: 10 - 15 μm
• Colour: red/brown

Drying Time (20° C object temperature):

• Dust Dry: 5- 10 min
• Set to touch: 20 - 30 min
• Recoatable: 40 - 50 min
• Flash off time between coats: 5-8 min