FINIXA 2K Epoxy- and Metal Adhesive 60 min - Black 220ml

Processing Times metal bonding

• Open Time (also called "wet time" or "pot life", is the time that the glue is wet enough to bond. The open time is temperature dependent.) at 23 ° C: is 60 minutes
• Working Time (During working hours can, the already be bonded part still be positioned. Do not remove the once bonded part apart) at 23 ° C: 90 minutes. (Processing time approximately 90 minutes)
• Handling time at 23 ° C: 4 hours (drying time 4 hours, the car can thus be moved after 4 hours)
• Full cure at 23 ° C: 24 hours

Where to use metal adhesive

• The solution for moving panels consisting of different raw materials to each other. Applications: Replace roof, aluminium door panel, rear door etc.
  

The advantages:

• Cures at room temperature.
• Minimal adhesive layer is guaranteed by 0.25 mm glass beads.
• Excellent resistance to automotive e-coat and powder coating.
• Spot weld possible (wet).
• Unique anti-corrosion formula so no need primer on white materials. 
• High energy absorption and high impact behaviour.
• Even after the opening of the cartridge has a shelf life of 2 years.
• Good persistence for both horizontal and vertical applications.
• Not flammable.
• Almost odourless.
• Paintable.

application:

• Bonding of panels.
• Bond metal, SMC, ABS, aluminium, galvanized steel, cold rolled steel and hot rolled steel.