EVERCOAT Rage Ultra Putty + Hardener - 3 litres

Evercoat Rage Ultra + Hardener

EVERCOAT Rage Ultra + Hardener is an excellent adhesive fine putty for filling small dents and blemishes. After only 10 minutes the putty is sandable, a sanding scratch of P180 is sufficient. Excellent adhesion to aluminum, stainless steel, steel and fiberglass.

How do I use the fine putty car?

The new patented formula does not sink in and has the best filling properties.

1. Clean and degrease the surface.
2. Dent out the surface (if necessary) so that you have a straight panel.
3. Remove old car paint on the part where it is no longer nice with P80.
4. Then sand with P180.
5. Apply Rage Ultra in thin layers.
6. Sand the putty with grit P80 and finish again with P180.
7. Apply Evercoat 440 Express.

Evercoat 440 Express

We recommend post-treating the surface with Evercoat 440 to remove micro pinholes. Then the primer can be applied.

Features EVERCOAT Rage Ultra + Hardener 3 liters

• Ideal in combination with Evercoat 440 Express
• For filling small dents and imperfections
• Can be applied on a sanded coat
• Sanding scratch of P180 is sufficient
• Fast drying
• Can be sanded in 10 minutes
• Light green/grey